제품소개
Main ProductsConsciousness and quality are the paramount values of Daein.


Interleaving HDPE Film(Daein IH Film)
  • • Daein IH film is developed to protect metal surfaces in the manufacturing process of stainless steel and copper products.
  • • Solution for cost reduction and quality improvement by substituting the existing millboard paper.


Example of Daein IH Film substitution >>
Daein IH Film Mill Board Paper
0.013mmt    12g/m²27g/m²
0.015mmt    14g/m²30g/m²
0.02mmt     19g/m²35g/m²
0.03mmt     28g/m²40g/m²
0.04mmt     38g/m²45g/m²


Advantages of Daein IH film vs. Mill board paper >>
Daein IH Film Mill Board Paper
1-2 times replacements a day. 4-6 times replacements a day.
(Work fatigue risk by the frequent replacement works.)
No paper dust. Poor press-fitting and dull surface on stainless steel caused by paper dust.
Production cost saving. Additional production time and workload to rewind the used paper for recycling.
Cost reduction in storage and logistics with lighter weight and smaller volume. Higher cost of storage and logistics. (more than double in weight and volume).
Strong moisture resistance and chemical resistance. Physical properties are easily changed by temperature and humidity (Standard condition: Humidity 65+2%, temperature 20°C). Tear strength decrease by temperature and humidity changes.
Humidity resistance. Unsuitable for long-term storage when the moisture content exceeds 9.7%.
Merits of reselling the used films. (More than twice as expensive as the used mill board paper) Low values of the used mill board paper.
100% recyclable and no chemicals needed in the recycling process. Environmental pollution by the chemicals used in the recycling process.


Daein IH Film application to stainless steel and copper products manufacturing process >>